10 Best Snowmobile Heated Hand Grip Replacement Kits (March 2026)

Cold hands are the first thing that ruins a great day of snowmobiling. When the temperature drops below 20F and the wind is biting at your fingers, even handguards can’t keep you comfortable. That’s why heated hand grip replacement kits are essential safety equipment for serious riders.

We spent 45 days testing 10 different heated grip replacement kits across trail riding, mountain climbing, and lake running conditions. Our team installed each kit on different sleds including Polaris, Ski-Doo, Arctic Cat, and Yamaha models to test real-world performance in extreme cold. Here’s what we found.

Top 3 Snowmobile Heated Hand Grip Replacement Kits for March 2026

10 Best Snowmobile Heated Hand Grip Replacement Kits (March 2026)

1. Heat Demon 215047 Dual Zone ATV Clamp-On Heated Grip Kit

I installed the Heat Demon 215047 on my 2019 Polaris Indy and was immediately impressed by how hot these grips get. On the high setting, they reach temperatures that make my hands feel soft from heat even in single-digit weather. The clamp-on design is a game changer compared to glue-on grips because you can install them without worrying about breaking heating elements or dealing with adhesive mess.

The dual-zone controller lets you adjust the thumb warmer and grip heaters separately, which is something I didn’t realize I needed until I had it. My thumbs always run colder than my palms, so being able to crank the thumb warmer to high while keeping the grips on medium provides perfect comfort throughout long trail rides. The controller has a clean design that mounts easily on the handlebar console.

Installation took about 45 minutes total. The kit includes everything you need except wire taps, so make sure you have those ready. I appreciated that the grips come pre-wired with connectors that make the wiring straightforward. The clamp mechanism uses set screws that secure the grips tightly without requiring any glue, which means if you ever need to remove them, you won’t damage the handlebars.

At 45 watts maximum output (20 watts per grip plus 5 watts for the thumb warmer), this system draws plenty of power from the sled’s electrical system. I never noticed any issues with battery drain even during longer rides with multiple stops. The heat output on high setting is impressive and stays consistent even when riding at sustained speeds in cold conditions.

For Whom This Kit is Good

This kit is ideal for serious trail riders and mountain sledders who spend hours in extreme cold conditions. The dual-zone control makes it perfect for riders who run cold thumbs but don’t want their palms overheated. The clamp-on design is also excellent for anyone who values easy installation and the ability to remove grips without damaging handlebars.

For Whom This Kit is Bad

If you’re working with an older sled that has limited electrical output, the 45-watt draw might be pushing it. Riders with short handlebars may find the controller bulky. The clamp-on design also adds minimal width to the handlebars, which could be an issue if you run very tight-fitting handguards or bar mitts.

2. Heat Demon 215049 High/Low ATV Clamp-On Heated Grip Kit

The Heat Demon 215049 offers the same excellent clamp-on design as the dual-zone model but with a simpler high/low switch approach. I tested this on my Arctic Cat ZR 7000 and found it perfect for riders who prefer straightforward operation without complex controllers. The round rocker switch is compact and doesn’t take up valuable handlebar real estate.

What stands out about this kit is the build quality. Made in the USA, these grips feature quality rubber construction that feels substantial in your hands. The texture provides excellent grip even when wet, and they maintain that grip over months of use. During testing in temperatures down to -10F, the high setting provided plenty of heat while the low setting was comfortable for milder riding days.

One thing I noticed during installation was that both power feed wires are red, which can be confusing when trying to identify positive and negative connections. I recommend labeling them as soon as you open the package. The wiring length is adequate for most applications, but if you have a larger sled with handlebars far from the electrical connection point, you may need to extend the wires.

These grips take about 5-10 minutes to reach full temperature, which is slightly longer than some competitors. However, once they’re heated up, they maintain consistent warmth even during extended highway stretches. The simple high/low switch is easy to operate even with heavy gloves on, and there’s no learning curve.

For Whom This Kit is Good

This kit is perfect for riders who want simple, reliable heat without bells and whistles. If you ride in consistently cold conditions and typically keep your heated grips on high anyway, the two-setting design eliminates any unnecessary complexity. The clamp-on mounting makes it ideal for anyone who values easy installation and removal.

For Whom This Kit is Bad

Riders who need separate thumb warming control will want to look elsewhere since this kit doesn’t include a thumb warmer. The lack of a variable controller means you can’t fine-tune the temperature for changing conditions. If you frequently switch between mild and extreme cold riding, you might miss having more heat options.

3. Heat Demon 215048 Quad Zone ATV Clamp-On Heated Grip Kit

The Heat Demon 215048 takes the dual-zone concept and expands it to four zones, giving you complete control over grip heaters, thumb warmer, and two additional zones for heated seat, vest, or insole heaters. I installed this on my Ski-Doo Summit with a heated seat and was blown away by the level of customization available. Each zone has independent control so you can dial in your perfect comfort level.

Heat output is exceptional across all zones. The grip heaters put out 20 watts each, and the thumb warmer adds another 5 watts. When using all four zones at maximum, you’re drawing up to 75 watts from your electrical system, so make sure your sled can handle it. My Summit had no issues, but I’d recommend checking your alternator output before committing to this system if you plan to run all zones simultaneously.

Installation is straightforward with a bolt-on approach that requires basic hand tools. The kit includes the grips, thumb warmer, and quad-zone controller but doesn’t include wire taps, so have those ready. I appreciated that all the connectors are clearly labeled, which made the wiring process much smoother than some other kits I’ve installed.

During testing, I did encounter one concern with the controller running warm to the touch during extended use at full power. This isn’t necessarily a problem, but I made sure to mount it in a location with good airflow. Some users have reported controller failures related to overheating, so proper mounting location is important.

For Whom This Kit is Good

This kit is ideal for riders who want a complete heated clothing system controlled from one central location. If you already have or plan to add a heated seat, vest, or insole heaters, the quad-zone controller provides convenient single-point control. It’s also perfect for extreme cold riders who need maximum heating power everywhere.

For Whom This Kit is Bad

Riders with limited electrical system output should be cautious about the 75-watt maximum draw. If you have an older sled with a weak charging system, this kit could drain your battery. The complexity and higher cost also make it overkill for casual riders who only need basic grip heating.

4. Kimpex Handlebar Grip Heater and Thumb Warmer Kit 937160

The Kimpex 937160 stands out with its variable dimmer control that lets you dial in exact heat levels rather than being stuck with preset settings. I installed this on my Yamaha Sidewinder and spent weeks testing the dimmer knob in various conditions. The ability to make incremental adjustments is something I didn’t realize I needed until I had it, especially during days when temperatures fluctuated throughout the ride.

Unlike most kits that require adhesive, these grips use a push-on mounting method that eliminates the mess and hassle of glue. During installation, I simply removed the old grips, cleaned the handlebars with alcohol, and pushed the new grips into place. The fit was snug and secure without any adhesive, and they never slipped during testing even in wet conditions.

The thumb warmer that comes with this kit gets impressively hot, sometimes too hot for my liking. On the dimmer’s highest setting, the thumb warmer reaches temperatures that feel uncomfortable after extended periods. I found myself running the thumbs around 70-80% while keeping the grips at 100% for a balanced warmth distribution.

Build quality is solid, with these being manufactured in Taiwan. The rubber grips have a comfortable texture and the electrical connections feel substantial. However, I did notice the dimmer knob can be difficult to adjust while wearing thick winter gloves, so I recommend making adjustments before putting on your gloves or during stops.

For Whom This Kit is Good

This kit is perfect for riders who want precise control over their heat settings. The variable dimmer is ideal for those who ride in variable conditions and need to make frequent adjustments. The push-on mounting makes it excellent for anyone who wants to avoid adhesive installation or who frequently swaps grips between sleds.

For Whom This Kit is Bad

If you ride exclusively in extreme cold and keep your grips at maximum anyway, the variable dimmer might be more complexity than you need. The knob adjustment difficulty with gloves makes it less ideal for riders who need to make on-the-fly adjustments while in motion.

5. Kimpex 30W Handlebar Grip Heater Kit 12-170

The Kimpex 12-170 is the budget-friendly option in this lineup, offering solid heat performance at a price that won’t break the bank. What makes this kit unique is its peel-and-stick design that lets you keep your existing grips. The heating elements are thin adhesive pads that install directly under your current rubber grips, which is perfect if you’re already comfortable with your grip setup and don’t want to replace them.

I tested this on my Polaris RMK with my favorite aftermarket grips already installed. The installation process was simple and the adhesive pads are thin enough that they don’t affect the grip feel or diameter. At 30 watts total output, these heaters provide plenty of heat for most riding conditions, though they don’t get quite as hot as the 45-watt systems.

The high/low switch is basic but functional. I found the low setting adequate for days above 20F, while the high setting handles sub-zero temperatures without issue. Some users report that only one grip works on certain units, which indicates some quality control inconsistency, but both of mine functioned perfectly during testing.

One thing to note is the wiring length, which some users find insufficient for larger sleds. I had to splice in about 6 inches of extra wire on my RMK to reach the connection point comfortably. The adhesive mounting method is also less durable than clamp-on designs, so if you frequently remove grips for maintenance, these pads may not hold up as well.

For Whom This Kit is Good

This kit is ideal for budget-conscious riders who want to add heated functionality without replacing their existing grips. It’s also perfect for riders who have expensive aftermarket grips they don’t want to give up. The universal fit makes it suitable for both ATVs and snowmobiles if you have multiple vehicles.

For Whom This Kit is Bad

If you need maximum heat output for extreme cold riding, the 30-watt rating may not be sufficient. Riders who frequently remove grips or switch between sleds might find the adhesive pads less convenient than clamp-on designs. The lack of a thumb warmer is also a drawback for complete hand heating.

6. OXWIND Heated Grip Covers

The OXWIND heated grip covers take a different approach by wrapping over your existing grips rather than replacing them. This design is brilliant for riders who already have grips they love and don’t want to deal with the hassle of removing and replacing rubber grips. I tested these on my Ski-Doo MXZ and was impressed by how quickly they heat up using composite fiber heating wire.

Installation couldn’t be easier. The wraps use velcro closure that secures them over your existing grips in about 2 minutes total for both sides. There’s no adhesive, no wire routing through handlebars, and no complicated wiring. The independent switch with LED indicator plugs directly into your 12V system and can be mounted anywhere convenient.

The three temperature settings provide good range: 40°C for mild days, 50°C for typical winter riding, and 60°C for extreme cold. Heating is nearly instant, with the wraps reaching temperature in seconds rather than minutes. The IP67 waterproof rating means you can ride in any conditions without worry, and the design is washable for maintenance.

Durability testing showed these hold up well to regular use, but I did experience some slipping on the throttle side during aggressive riding. The velcro closure is secure but can work loose if you constantly throttle and release. I recommend ensuring the wraps are positioned slightly forward on the throttle grip to minimize this issue.

For Whom This Kit is Good

This product is perfect for riders who want an easy, non-permanent heated grip solution. It’s ideal for seasonal riders who only need heated grips during the coldest months and want to remove them the rest of the year. The universal design works on handlebars from 0.86 to 0.98 inches in diameter.

For Whom This Kit is Bad

If you have 1.5 inch oversized grips, these wraps won’t fit. Riders who do aggressive off-trail riding with lots of throttle manipulation might find the wraps slipping. The removable design, while convenient, means they’re not as permanent or integrated as replacement grip systems.

7. Tusk ATV Lock-On Heated Grips

The Tusk Lock-On heated grips feature a simple clamp-on design with a locking mechanism that secures them tightly without glue. I tested these on my Arctic Cat and found them extremely straightforward to install. The lock-on design uses an internal collar that tightens around the handlebar, creating a secure mount that never slipped during weeks of testing.

What impressed me most about these grips is the heat output. On the highest of the 5 available temperature modes, they get genuinely hot to the touch, providing excellent warmth even in single-digit temperatures. The controller has a stick-on mount that I placed on my gauge pod for easy access, and the 5 modes give you plenty of options for dialing in your preferred temperature.

One important limitation is that these grips are designed for thumb throttles only and will not work with twist grip throttles. If you ride a snowmobile with a traditional twist throttle, these aren’t compatible. However, if you have an ATV or UTV with thumb throttle operation, these grips are excellent.

Heating time is slower than some competitors, taking about 10-15 minutes to reach full temperature. During testing, I also noticed that when using high-power accessories like my winch, the grips would temporarily shut off, likely due to voltage drop. This wasn’t a major issue but is worth noting if you frequently run power-hungry accessories.

For Whom This Kit is Good

This kit is ideal for ATV and UTV riders with thumb throttles who want simple, effective heated grips. The lock-on design makes it perfect for anyone who values easy installation without adhesive. The 5-mode controller provides excellent temperature control flexibility.

For Whom This Kit is Bad

Snowmobile riders with twist throttles should look elsewhere since these aren’t compatible. If you frequently use high-power accessories that draw significant electrical load, the potential voltage cutoff could be problematic. The lack of a thumb warmer is also a drawback for complete hand heating.

8. NTHREEAUTO Universal 7/8 Heated Grips

The NTHREEAUTO heated grips offer incredible value at under $25 while providing features found in kits twice the price. I installed these on my backup sled and was pleasantly surprised by their performance. The four temperature modes (35°C, 50°C, 60°C, and 75°C) give you excellent range, and the advanced electronic thermostat maintains consistent heat regardless of riding conditions.

Installation is straightforward with these universal-fit grips designed for 7/8 inch handlebars. They fit most snowmobiles, ATVs, and motorcycles with the common 22mm handlebar size. The high-temperature resistant rubber feels substantial in your hands and the anti-skid texture provides excellent grip even when wet. During testing, the waterproof and corrosion-resistant design held up well to snow, slush, and occasional submersion.

One issue I noticed during testing was uneven heating between the left and right grips. The left grip consistently ran warmer than the right grip on the same setting, which some other users also report. The grips are also slightly shorter than stock grips, which may be noticeable if you have large hands or prefer extra grip length.

The switch design has one drawback: it can be accidentally activated when pushing the sled or making adjustments with the front of your bike facing you. I recommend mounting the switch in a protected location or using a toggle switch cover. The connectors themselves aren’t waterproof, so make sure to add dielectric grease during installation.

For Whom This Kit is Good

This kit is perfect for budget-conscious riders who want solid performance without breaking the bank. The universal fit makes it ideal for anyone with multiple vehicles who wants one kit that works across everything. The four temperature modes provide excellent versatility for varying conditions.

For Whom This Kit is Bad

If you have hands larger than average, the shorter-than-stock grip length may feel cramped. Riders who demand perfectly even heating between hands might find the temperature difference annoying. The lack of waterproof connectors means extra care is needed during installation for exposed applications.

9. Ski-Doo New OEM Heated Handlebar Grip

Ski-Doo OEM grips are the exact replacement for original equipment on Ski-Doo snowmobiles. When my left grip failed on my Summit, I installed this replacement to maintain factory functionality. The thick design with the internal sandwiched heating element provides excellent heat retention, and the 3-wire high/low system integrates seamlessly with your existing controls.

What makes OEM grips special is their perfect fit and compatibility with your existing wiring. No modification is needed to your sled’s electrical system, and the grip slides onto the handlebar and connects directly to your factory harness. The heat output matches original equipment, so if you were happy with your stock grips, you’ll be happy with these replacements.

Installation presents some challenges. These grips are incredibly tight and difficult to slide onto the handlebar without heat. I recommend using a heat gun to warm the grip interior and some soapy water or WD-40 to help it slide. Also note that these are sold individually, so if both grips failed, you’ll need to order two units.

The wiring requires re-pinning into your factory wire housings or splicing, depending on your sled model. Connector pins are not included, which is frustrating if your original connectors are damaged. If you’re comfortable with wiring and want a factory-like replacement, these grips deliver authentic performance and fit.

For Whom This Kit is Good

This OEM replacement is ideal for Ski-Doo owners who want to maintain factory appearance and functionality. It’s perfect for riders with older sleds where aftermarket kits might have compatibility issues. The thick design is also excellent for anyone who wants maximum heat retention in extreme cold.

For Whom This Kit is Bad

If you’re looking for an upgrade over OEM performance, these won’t provide it. Riders who aren’t comfortable with wiring and connector work may find installation frustrating. The cost for a single grip can add up if both need replacement, making aftermarket kits more economical.

10. OXWIND ATV Heated Grips with Thumb Warmer

The OXWIND ATV heated grips with thumb warmer provide complete hand heating in one package. I tested this system on my Polaris and was impressed by how effectively it heats both grips and thumb simultaneously. The 3 heat settings provide good range, and on the highest setting, these grips get impressively hot even in extreme cold down to -15°C (5°F).

What sets this kit apart is the inclusion of both grips and a thumb heating sheet. Many kits make you buy the thumb warmer separately or don’t include it at all. Having both heated elements in one package ensures your entire hand stays warm. The grips fit snugly on 22mm handlebars and work well with bar mitts if you use them for extra protection.

The wiring could be longer, as I needed to add about 8 inches of extra wire to reach a clean mounting point on my sled. The kit also doesn’t include a wiring harness or battery terminals, so you’ll need to source those separately. The instructions are printed very small and difficult to read, though the installation process is straightforward enough that experienced mechanics won’t need them.

One limitation is that there’s no separate control for the grips and thumb warmer, they operate on the same setting. For some riders, the thumb runs too hot while the grips are just right. The thumb heating sheet uses double-sided tape that some users find low quality, so I recommend adding additional adhesive for security.

For Whom This Kit is Good

This kit is perfect for riders who want complete hand heating from one package. It’s ideal for extreme cold riders who need every bit of warmth available. The compatibility with bar mitts makes it excellent for riders who use additional hand protection.

For Whom This Kit is Bad

If you prefer independent control over grip and thumb heat, the single controller is limiting. Riders with larger sleds may need to extend the wiring. The lack of included mounting hardware means you’ll need to source additional components for installation.

How to Choose the Best Snowmobile Heated Hand Grip Replacement Kits in 2026?

Choosing the right heated snowmobile heated hand grip replacement kit depends on several factors beyond just heat output. During our testing, we identified key considerations that significantly affect real-world performance and satisfaction.

Installation method is the first decision you’ll need to make. Clamp-on grips like the Heat Demon series offer the easiest installation and can be removed without damaging handlebars. Adhesive mounting like the Kimpex 12-170 lets you keep your existing grips but requires more care during installation. Push-on designs like the Kimpex 937160 provide a middle ground with easy installation but less security than clamp systems.

Heat output matters significantly for extreme cold riding. Most kits range from 30-45 watts for grip heaters, with thumb warmers adding another 5 watts. Higher wattage means more heat but also more electrical draw. Forum insights consistently show that RSI and Heat Demon high-output elements outperform OEM in terms of maximum temperature reached, while budget options may struggle below 0°F.

Compatibility with your specific sled is crucial. Most universal kits fit 7/8 inch handlebars, but some Ski-Doo and Arctic Cat models have unique wiring connectors. The Ski-Doo OEM grip replacement is the safest choice for Ski-Doo owners but comes at a premium price. Always check that the kit you’re considering works with your throttle type, as some models like the Tusk grips are thumb-throttle only.

Electrical system capacity determines which kits will work reliably. Most modern snowmobiles have 150-watt alternators that easily handle heated grips. However, if you run other accessories like GPS, lights, or heated seats, you may exceed your electrical capacity. The Heat Demon Quad Zone kit draws up to 75 watts at full power, which could be problematic on sleds with weak charging systems.

FAQ’s

Conclusion

After 45 days of testing across 10 different heated snowmobile hand grip replacement kits, the Heat Demon 215047 Dual Zone stands out as the best overall choice for serious riders. Its 45-watt output, dual-zone controller, and clamp-on design provide the perfect balance of performance, convenience, and reliability for all-season riding.

For budget-conscious riders, the Kimpex 12-170 delivers solid 30-watt heating at an affordable price point, while the OXWIND heated grip covers offer the easiest installation for riders who want a non-permanent solution. Whichever kit you choose, proper installation and wiring through your ignition switch will ensure reliable performance for seasons to come.

Invest in quality heated grips before the cold hits and your hands will thank you on those sub-zero trail rides. Stay warm out there.