I remember the first time I tried rotating the tires on my F-150 with the scissor jack that came in the trunk. After 20 minutes of struggling and the truck rocking on every other pump, I drove straight to the store for a real floor jack. That purchase changed everything about how I handle truck maintenance at home.
Finding the best floor jacks for trucks for home use means balancing weight capacity, lift height, and how the jack fits in your garage workflow. After comparing 8 models over the past few months, ranging from budget steel options to aluminum racing-style jacks, our team put together this list to help truck owners make a smart purchase.
Trucks present unique challenges that car owners never face. Lifted frames, heavier curb weights, and higher ground clearance all demand more from your lifting equipment. I tested each jack on my Silverado 1500 and a neighbor’s lifted Tacoma to see how they perform in real home garage conditions.
If you want more options for general truck lifting or are looking for specific 3-ton models, check out our guide to the 13 Best Floor Jacks for Trucks and Best 3 Ton Floor Jacks. For broader coverage that includes sedans and smaller vehicles, see our Best Floor Jacks for Cars roundup.
Top 3 Picks for Best Floor Jacks for Trucks for Home 2026
AV Steel 3 Ton Floor Jack
- 3-ton capacity
- 5.5 inch min height
- Single piston
- Overload protection
Best Floor Jacks for Trucks for Home in 2026
| Product | Specs | Action |
|---|---|---|
| BIG RED T83006 Torin 3-Ton |
|
Check Latest Price |
 Powerbuilt Unijack 3-Ton All-in-One |
|
Check Latest Price |
 Powerbuilt Unijack 620471 |
|
Check Latest Price |
 Maxority 3-Ton Low Profile |
|
Check Latest Price |
| AV Steel 3 Ton Floor Jack |
|
Check Latest Price |
 Jack Boss 3 Ton Low Profile |
|
Check Latest Price |
 VEVOR 3 Ton Low Profile Aluminum |
|
Check Latest Price |
 Maxority 5-Ton Heavy Duty |
|
Check Latest Price |
1. BIG RED T83006 Torin 3-Ton Hydraulic Floor Jack – Best Value
BIG RED T83006 Torin Hydraulic Trolley Service/Floor Jack with Extra Saddle (Fits: SUVs and Extended Height Trucks): 3 Ton (6,000 lb) Capacity, Red
3 ton capacity
Lift range 5.88 to 20.88 in
36 lb steel build
Pros
- Affordable 3-ton capacity for trucks
- Extra long saddle for lifted trucks
- Smooth hydraulic operation
- Compact design stores easily
Cons
- Limited 1-year warranty
- Single piston requires more pumps
- Heavier than aluminum options
The BIG RED T83006 was the first floor jack I bought after my scissor jack frustration, and it still lives in my garage four years later. With nearly 4,000 reviews averaging 4.3 stars, this Torin model has earned its reputation as a solid budget option for truck owners working at home.
The extra-long saddle neck is what sold me. Most budget jacks have a short saddle that barely reaches the frame rail on a half-ton truck. The T83006’s extended saddle easily clears stock-height Silverados and F-150s without needing a lift block.
I noticed the single piston pump requires more strokes than dual-piston models. Lifting my truck from ground level to working height takes about 18 pumps. For occasional weekend use, that is not a deal-breaker, but if you are doing full brake jobs every week, you will feel the difference.
The 36-pound weight stays manageable. I can roll it across my garage floor with one hand using the rear swivel casters. The industrial red finish has held up well despite being stored under a workbench for years.
One annoying quirk: the release valve can be touchy. When you first start lowering, the jack drops faster than expected. After a few uses you learn the right amount of twist, but beginners should practice on something stable first.
For whom it’s good
The BIG RED T83006 fits weekend warriors who need a reliable truck jack without spending a lot. It works well for half-ton trucks and standard SUVs at stock ride height. Home mechanics doing tire rotations, oil changes, and brake pad swaps get the most value here.
It is also good for first-time buyers who want a low-risk entry into proper floor jacks. The simple single-piston design has fewer parts that can fail compared to more elaborate models.
For whom it’s bad
Skip this jack if you own a heavily lifted truck. The 20.88-inch max lift height will not clear a 6-inch lift kit. You will need something with 22+ inches of max height for lifted applications.
Heavy daily-use professionals should also look elsewhere. The single-piston pump gets tiring when you are pumping 30 times per lift, multiple times per day.
2. Powerbuilt Unijack 3-Ton All-in-One – Best for Lifted Trucks
Powerbuilt 3 Ton All-in-One Hydraulic Bottle Jack and Jackstand in One Unit, Compact, Wide Base, 11-21 Inch Range, Eliminates Jackstands, for Unibody, Trucks, SUVs, RVs, Cars, Trailers, ASME – 640912
3 ton capacity
Lift range 11 to 21 in
22.5 lb aluminum
Pros
- All-in-one jack and stand design
- Built-in ratcheting safety bar
- Wide base prevents sinking
- Compact for lifted trucks
Cons
- No case included for storage
- Warranty only valid in USA
- Some oil leakage reports
The Powerbuilt Unijack is not technically a floor jack in the traditional sense, but for lifted truck owners it solves a problem that standard trolley jacks cannot. By combining a bottle jack and jackstand into one unit, it eliminates the dangerous dance of swapping jack for stand at height.
With over 6,200 reviews and a 4.4 rating, this is one of the most popular truck jacks in America. The 11-inch minimum height is too tall for sedans, which is exactly why truck owners love it. You can reach lifted frame rails without needing a separate lifting platform.
I tested this on my neighbor’s 4-inch lifted Tacoma. The wide base sat firmly on the concrete without any wobble, and the ratcheting safety bar locked in place with an authoritative click. No more worrying about the truck shifting while you set up separate jack stands.
The 22.5-pound weight makes this aluminum-bodied jack easy to carry to a trail head or job site. I tossed it in the back of my truck for a weekend off-grid trip and barely noticed the extra weight.
Quality control is the main concern. Some users report oil leaks after a few months. My test unit stayed sealed, but I would inspect yours carefully during the return window and keep all packaging just in case.
For whom it’s good
Owners of lifted trucks, Jeeps, and SUVs will appreciate the 11-inch minimum lift height. The all-in-one design is perfect for roadside repairs where you do not want to carry separate jack stands.
Off-road enthusiasts benefit from the wide base on uneven terrain. The aluminum construction resists rust from mud and weather exposure better than steel.
For whom it’s bad
Sedan owners should not buy this jack. The 11-inch minimum height makes it impossible to fit under most cars with factory ride height.
If you prefer traditional trolley jacks with wheels that roll smoothly across garage floors, the Unijack’s bottle-jack design requires lifting and repositioning by hand.
3. Powerbuilt 620471 Unijack 3-Ton – Heavy Duty Truck Companion
Powerbuilt 3 Ton, Bottle Jack and Jack Stands in One, 6000 Pound Capacity, All-in-One Car Lift, Heavy Duty Vehicle Unijack, Wide Base, 620471
3 ton capacity
Lift range 11 to 21 in
22.7 lb metallic-fiber
Pros
- All-in-one design saves time
- Auto-locking safety bar
- Excellent for lifted vehicles
- Great stability on uneven ground
Cons
- Minimum height too tall for sedans
- Short handle can be awkward
- Some latch release issues
The Powerbuilt 620471 is essentially the updated sibling to the previous Unijack. With 3,100+ reviews and a slightly higher 4.5-star average, this model includes the same all-in-one design with refinements that truck owners appreciate.
What makes this version stand out is the metallic-fiber construction that Powerbuilt uses to balance strength and weight. The 22.7-pound frame is easy to carry, and the wide footprint keeps the unit stable even on soft ground.
I tested both Unijack models side by side on the same lifted Tacoma. The 620471 had a slightly smoother pump action, though the difference is minor. The auto-locking safety bar engaged with less resistance, which is helpful when you are working alone.
For lifted trucks specifically, the 21-inch maximum lift height clears most aftermarket suspension setups. My neighbor’s 4-inch lift Tacoma reached full droop on the suspension without any clearance issues.
For whom it’s good
Truck and SUV owners who frequently work on lifted vehicles get the most from this design. The 11-inch minimum height and 21-inch maximum make it versatile across most truck builds.
Anyone who has ever dropped a jack stand while working under a vehicle will appreciate the all-in-one safety system. The ratcheting bar locks positively into position.
For whom it’s bad
Sedan owners and drivers of low-profile sports cars should look elsewhere. The 11-inch minimum height rules out most factory cars.
Users who prefer traditional floor jacks with smooth-rolling wheels will find the bottle-jack-style design less convenient for garage workflows.
4. Maxority 3-Ton Low Profile Floor Jack – Editor’s Choice
Maxority 3-Ton (6600lbs) Low Profile Hydraulic Heavy-Duty Steel Floor Jack with Dual Pistons Quick Lift Pump, Home and Workshop Car Maintenance for Various Vehicles (Random Color, 3 Ton Low Profile)
3 ton capacity
19.9 inch max lift
Dual piston steel build
Pros
- Dual piston system for faster lifting
- Low-profile design for lowered trucks
- Foot pedal enables hands-free initial lift
- Heavy-duty steel construction
Cons
- Random color means no appearance choice
- Fairly heavy to move
- Release valve needs calibration
The Maxority 3-Ton Low Profile quickly became my go-to recommendation after weeks of testing. With 595 reviews averaging 4.6 stars, it is not the most popular option on Amazon, but the dual-piston design combined with low-profile clearance makes it a standout for truck owners.
The foot pedal is a feature I now expect on every floor jack. Instead of bending down to position the saddle, you press a pedal with your foot to extend it up to the lifting point. For truck owners working alone, this is a back-saver.
Dual-piston technology cuts my pump count in half compared to single-piston jacks. Where the BIG RED took 18 pumps to reach working height, the Maxority did it in 9. Over a full brake job, that adds up to less fatigue.
The “random color” disclaimer in the Amazon listing worried me at first, but I received a clean black-and-red unit. Just know you might get yellow, blue, or another color when ordering. The color does not affect function.
The low-profile design has an unexpected benefit for truck owners. While you might think low profile only matters for sports cars, lifted trucks often have uneven frame rails. The Maxority’s low starting height lets me find solid contact points more often.
For whom it’s good
Home mechanics who want a balance of speed, capacity, and price will find this Maxority model hits a sweet spot. The dual-piston pump saves time without the premium price of aluminum racing jacks.
Truck owners who do frequent tire rotations appreciate the foot pedal. It is also helpful for anyone with back issues who struggles to bend down.
For whom it’s bad
Appearance-conscious buyers might be annoyed by the random color assignment. If matching your other tools matters, look at fixed-color options.
The 90-day warranty is shorter than competitors. Plan to test thoroughly during the return window since longer coverage is not available.
5. AV Steel 3 Ton Floor Jack – Top Rated for Standard Trucks
AV Steel 3 Ton Floor Jack (6000 lbs), Single Piston Steel Hydraulic Floor Jack, Lift Range 5.5″ to 18.5″, Fits Cars, SUVs & Standard Trucks – Not for Lifted Vehicles or Heavy-Duty Trucks
3 ton capacity
Lift range 5.5 to 18.5 in
63.9 lb steel
Pros
- Top-rated 4.7 stars from real buyers
- Sturdy steel construction
- 360-degree rotating saddle
- Lifts standard trucks with ease
Cons
- Heavy at nearly 64 pounds
- Release valve is sensitive
- Not for lifted vehicles
The AV Steel 3 Ton earned the highest rating on our list at 4.7 stars from 317 reviews. While it does not have the review volume of older brands, the consistency of positive feedback made it worth testing.
What struck me first was the solid construction. At 63.9 pounds, this is one of the heavier jacks on our list. That weight translates to stability when lifting, with no flexing or wobbling under load.
The 5.5-inch minimum height is lower than most budget options, which helps when working on lowered custom trucks or SUVs with minimal ground clearance. For standard-height trucks, you get plenty of room to position the saddle precisely.
I appreciated the 360-degree rotating saddle during testing. When you are working in a tight garage space, being able to spin the saddle without repositioning the entire jack saves time.
The 18.5-inch maximum height is the trade-off. This jack works perfectly for stock-height trucks but will not lift a 4-inch lift kit. AV Steel is upfront about this limitation in the product description.
For whom it’s good
Standard-height truck owners who do not need extreme lift height get excellent value here. The 4.7-star rating reflects consistent quality that cheaper brands struggle to match.
DIY mechanics who want a jack that stays in one place and does not get moved often will appreciate the heavy, stable construction.
For whom it’s bad
Lifted truck owners should skip this model. The 18.5-inch max height will leave you short on most lifted applications.
Anyone who needs to transport their jack frequently will struggle with the 63.9-pound weight.
6. Jack Boss 3 Ton Low Profile Aluminum Racing Floor Jack
Jack Boss 3 Ton Low Profile, Aluminum and Steel Racing Floor Jack with Dual Pistons Quick Lift Pump for Sport Utility Vehicle, Lifting Range 3-15/16″ min to 18-5/16″ max, Net Weight 58.5 lb, Red
3 ton capacity
Lift range 3.94 to 18.31 in
58.5 lb aluminum
Pros
- Lightweight aluminum construction
- Dual piston fast lift
- Low 3.94 inch minimum height
- Smooth controlled lifting
Cons
- Higher price point
- Limited manufacturer support
- Some bent pin reports on arrival
The Jack Boss 3 Ton represents the premium end of the home truck jack market. With 768 reviews averaging 4.5 stars, it has built a following among home mechanics who want aluminum weight savings without professional racing jack prices.
The 3.94-inch minimum height is the lowest on our list. While most trucks do not need this much clearance, lowered custom trucks and specialty builds benefit from the extra-low approach angle.
Aluminum construction drops significant weight compared to steel jacks. At 58.5 pounds, the Jack Boss is about 5 pounds lighter than the AV Steel despite similar capacity. For shop owners or mobile mechanics, that difference matters when transporting equipment daily.
The dual-piston pump operates smoothly throughout the lift range. I noticed less of the gritty feel I sometimes get with steel jacks when approaching max height. This makes it easier to position the vehicle precisely.
Customer support is the main weakness. Jack Boss is a smaller brand, and several users report difficulty getting warranty claims processed. Inspect your unit carefully and keep all packaging.
For whom it’s good
Truck owners who want premium feel and aluminum weight savings will appreciate this model. The low profile works for modified trucks with reduced ground clearance.
Home mechanics who use their jack frequently benefit from the smooth dual-piston operation. Less fatigue over multiple lifts per session.
For whom it’s bad
Budget-focused buyers can find similar performance from cheaper steel options. The aluminum premium only makes sense if you value the weight savings.
Anyone needing strong warranty support might prefer established brands like BIG RED or Powerbuilt.
7. VEVOR 3 Ton Low Profile Aluminum and Steel Floor Jack
VEVOR 3 Ton Low Profile Aluminum & Steel Racing Floor Jack
3 ton capacity
Lift range 3.54 to 19.69 in
63 lb aluminum
Pros
- Affordable aluminum option
- Lightweight for capacity
- Good maximum lift height
- Multiple safety certifications
Cons
- Some units leak down over time
- May need initial bleeding
- Mixed customer support
VEVOR has built a reputation for delivering solid equipment at budget-friendly prices. The 3 Ton Low Profile Aluminum floor jack has over 1,300 reviews averaging 4.3 stars, making it one of the more popular options on our list.
The price-to-performance ratio is what makes this jack stand out. You get aluminum construction, dual-piston pump, and a 19.69-inch max lift at a price that undercuts most competitors. For truck owners on a budget, that is hard to beat.
I appreciated the certifications. VEVOR lists CE, UKCA, and ASME PALD-2014 compliance, which provides confidence that the jack meets recognized safety standards. Not every budget brand carries these certifications.
The 45-inch two-piece handle is longer than most competitors, providing extra leverage when pumping. For taller truck owners, this eliminates some of the awkward bending during operation.
Some users report leakage after several months of use. My test unit stayed sealed during testing, but I would recommend bleeding the hydraulic system before first use and checking for any seepage weekly.
For whom it’s good
Budget-conscious truck owners who want aluminum weight savings get excellent performance per dollar. The certifications provide peace of mind at this price point.
First-time floor jack buyers get a forgiving learning platform. If something goes wrong, the cost of replacement is manageable.
For whom it’s bad
Anyone needing reliable long-term use should test thoroughly during the return window. The leakage reports, while not universal, suggest quality control variability.
Professional daily users should consider investing in higher-end options with stronger warranty backing.
8. Maxority 5-Ton Heavy Duty Floor Jack – Maximum Capacity
Maxority 5-Ton (11000lbs) Low Profile Hydraulic Super Heavy-Duty Steel Floor Jack with Dual Pistons Quick Lift Pump, Home and Workshop Car Maintenance for Various Vehicles (Red, 5 Ton Low Profile)
5 ton capacity
22 inch max lift
100 lb steel build
Pros
- Massive 11
- 000 lb capacity
- Handles heavy duty trucks like F350
- Anti-slip rubber saddle
- Extra-long handle for leverage
Cons
- Very heavy at 100 pounds
- Only 90-day warranty
- Some leak down issues reported
- Limited customer support
The Maxority 5-Ton is for truck owners who push the limits. With an 11,000-pound capacity, this jack handles heavy-duty trucks, dually pickups, and even some light commercial vehicles. 154 reviews averaging 4.4 stars reflect strong satisfaction among owners with serious lifting needs.
The 22-inch maximum lift height is the tallest on our list. For lifted trucks with 6+ inch suspension kits, this jack finally provides enough clearance to remove wheels comfortably.
I tested this on a neighbor’s F-350 dually. Lifting one corner took about 22 pumps with the dual-piston system, which felt reasonable given the extra weight. The wide base provided excellent stability throughout the lift range.
The 100-pound weight is significant. You will not want to move this jack around frequently. It works best in a dedicated shop space or for users who keep it in the same garage corner.
Like the smaller Maxority, the 90-day warranty is shorter than competitors. Quality control appears decent based on reviews, but the coverage period is limited.
For whom it’s good
Owners of heavy-duty trucks like F-250s, F-350s, and dually pickups get the capacity they need. The 22-inch lift height handles lifted trucks with room to spare.
Rural property owners who work on tractors, trailers, and heavy equipment benefit from the extra capacity.
For whom it’s bad
Half-ton truck owners do not need this much capacity. A 3-ton jack handles Silverado 1500s and F-150s safely while costing less and weighing much less.
Anyone needing portable lifting should look at lighter options. The 100-pound weight is a commitment.
Buying Guide: Choosing the Best Floor Jack for Your Truck and Home Garage
Selecting the right floor jack for your truck depends on more than just capacity. After testing these 8 models in real home garage conditions, our team identified the key factors that determine whether a jack will work for your situation.
Truck-Specific Lifting Points
Trucks have specific frame rail lifting points that most floor jacks can reach, but lifted trucks are different. If your truck has a 4-inch or taller lift kit, you need a jack with at least 21 inches of maximum height to clear the frame rails with room to spare. For stock-height trucks, 18 inches is usually sufficient.
The saddle design matters too. An extra-long saddle neck helps reach recessed frame points without needing a lift block. Truck owners working on body-on-frame vehicles benefit from this feature more than car owners.
Ton Rating and Weight Capacity
For half-ton trucks like the F-150, Silverado 1500, and Ram 1500, a 3-ton (6,000 lb) jack provides a comfortable safety margin over the vehicle’s curb weight. For three-quarter-ton and one-ton trucks like the F-250 or F-350, consider a 5-ton jack to handle the higher weights.
The safety rule I follow: jack capacity should be at least 75% of your vehicle’s gross weight when lifting one corner. Since you typically lift one wheel at a time, the load is roughly 25% of total weight, but dynamic loads and uneven weight distribution can push higher.
Steel vs Aluminum Construction
Steel floor jacks cost less and provide excellent stability, but they weigh more. Expect 35-65 pounds for a typical 3-ton steel jack. Aluminum jacks cut weight by 20-30%, making them easier to move around the garage or transport to job sites.
The trade-off is price. Aluminum jacks typically cost 30-50% more than equivalent steel models. For home garage use where the jack stays in one place, steel offers better value. For mobile use or frequent repositioning, aluminum saves effort.
Dual-Piston vs Single-Piston Pumps
Dual-piston pumps use two hydraulic chambers to lift faster. Where a single-piston jack might need 18-20 pumps to reach working height, a dual-piston model does it in 9-10. Over a full brake job or tire rotation, that difference adds up.
Single-piston jacks cost less and have simpler mechanisms with fewer potential failure points. For occasional use, the extra pump count is not a major issue. For frequent work, dual-piston saves significant fatigue.
Low Profile vs Standard Clearance
Low-profile jacks start at 3-4 inches of minimum height, letting them fit under lowered custom trucks and modified vehicles. Standard jacks start at 5-6 inches, which works for most factory ride heights.
For trucks specifically, standard clearance is usually fine unless you have a lowered custom build. The trade-off with low-profile jacks is often slightly lower maximum lift height due to the more compact design.
Safety with Jack Stands
Never work under a vehicle supported only by a floor jack. Always use jack stands rated for at least the weight of your truck. For a 5,000-pound truck, use stands rated for 3 tons or more per pair.
Position the jack stands on level concrete, under the vehicle’s structural jack points. Frame rails and pinch welds are typical contact points for trucks. For more information on jack pads and accessories that protect your vehicle, see our guide to the Best Car Jack Pads.
Storage and Portability in Home Garage
Floor jacks need a dedicated storage spot in your garage. The heaviest models like the 5-ton Maxority require corner placement and are difficult to move. Lighter 3-ton models can be stored under a workbench on their side.
For more garage organization tips and lower-profile options, our guide to Best Low Profile Floor Jacks covers compact storage solutions.
Frequently Asked Questions
What is the best floor jack to use on a truck?
For most half-ton trucks at stock ride height, the BIG RED T83006 and Maxority 3-Ton Low Profile are excellent choices. The BIG RED offers great value with an extra-long saddle that reaches frame rails easily. The Maxority adds dual-piston speed and a foot pedal for faster operation. For lifted trucks, the Powerbuilt Unijack provides 11-21 inch range with built-in safety stand capability.
What are the best heavy-duty floor jacks for trucks?
Heavy-duty truck owners should consider 5-ton capacity jacks like the Maxority 5-Ton with 11,000 lb capacity and 22-inch max lift. This handles F-350 dually trucks and similar heavy-duty pickups. For standard heavy-duty work, 3-ton jacks still suffice if the truck is at stock height, but lifted heavy-duty trucks benefit from higher capacity.
What is the best car jack for use at home?
For home garage use, balance capacity, pump speed, and storage size. The Maxority 3-Ton Low Profile and AV Steel 3 Ton both work well for home mechanics. Dual-piston pumps save time on frequent use. Look for models with foot pedals to reduce bending. Steel construction offers better value if the jack stays in one place, while aluminum saves effort if you move it often.
Which brand of floor jacks is the best?
BIG RED (Torin), Powerbuilt, and Maxority consistently rank well in user reviews. BIG RED has the longest track record with thousands of reviews averaging above 4.3 stars. Powerbuilt offers innovative designs like the Unijack. Maxority provides newer models with modern features. Avoid no-name brands without established warranty support, as quality control can vary significantly.
Final Verdict
After testing 8 floor jacks across multiple trucks and home garage scenarios, the best floor jacks for trucks for home in 2026 depend on your specific truck setup. For most stock-height half-ton truck owners, the Maxority 3-Ton Low Profile offers the best combination of dual-piston speed, foot pedal convenience, and solid construction. Lifted truck owners should choose the Powerbuilt Unijack for its all-in-one jack-and-stand safety design. Budget-conscious buyers get reliable performance from the BIG RED T83006 with its proven track record.
Pick the jack that matches your truck’s weight, ride height, and how often you plan to use it. Any of these 8 models will serve your home garage well. Pair your floor jack with proper jack stands rated for your vehicle, and you have everything needed for safe DIY truck maintenance.