A motorcycle phone mount should do one job without drama: hold your phone where you can see GPS directions while keeping it away from vibration, slips, and blocked controls. For most riders, the Quad Lock kit is the strongest dedicated system in this group, while the BRCOVAN eight-claw holder is the more universal clamp-first choice.
These best motorcycle phone mounts cover nine distinct setups, from a no-tool magnetic tank option for compatible cruisers to a waterproof fork-stem case for sportbikes. I focused on the product specifications, published review patterns, stated phone and bar ranges, and the concerns riders repeat in forum discussions rather than treating every mount as a one-size-fits-all answer.
Camera vibration deserves attention before convenience. Forum riders have reported iPhone camera problems after riding without a dampener, so the models with a stated vibration-control system get particular attention in this 2026 guide.
The top 3 motorcycle phone mounts cover dedicated security, universal grip, and metal adjustment 2026
The three cards below make the quickest decision simple: choose the Quad Lock for its phone-specific case and vibration dampener, BRCOVAN for an enclosed universal grip, or Lamicall for a metal locking clamp with broad viewing adjustment.
These nine best motorcycle phone mounts give riders a fast fit-and-feature overview in 2026.
Start with the mounting point on your bike, then confirm your phone dimensions and case thickness against the listing. A secure clamp with the wrong bar range, or a tank magnet on a nonmagnetic tank, is still the wrong mount.
| Product | Specs | Action |
|---|---|---|
 Tackform Chrome 20MAXX |
|
View on Amazon |
 Lamicall All-Metal Mount |
|
View on Amazon |
 BRCOVAN Eight-Claw Mount |
|
View on Amazon |
 Marsrider 3rd Gen Holder |
|
View on Amazon |
 Quad Lock Handlebar Kit |
|
View on Amazon |
 MOGGAM Dual Clamp |
|
View on Amazon |
 BRCOVAN Charging Mount |
|
View on Amazon |
 FREAKMOUNT 2.0 |
|
View on Amazon |
 iMESTOU Fork Stem Case |
|
View on Amazon |
1. Tackform Chrome 20MAXX is the long-reach choice for large cruiser handlebars.
Tackform Chrome Motorcycle All Metal Phone Mount – Vibration Dampening 20MAXX Spring Cradle | 3.5″ Long Reach Arm | Universal Clamp Fits 1-1/4″ to 1-1/2″ Bars | Compatible with iPhones, Galaxy, More
20mm ball system
Vibration dampener
Fits 1.25 to 1.5 inch bars
Pros
- Vibration-dampened cradle
- Universal phone fit
- Heavy-duty spring tension
- Lifetime warranty
Cons
- Not water resistant
- Chrome needs care
Tackform’s Chrome 20MAXX is built around a 20 mm ball-and-socket setup, a 3.5-inch long-reach arm, and a bar clamp for 1.25-, 1.375-, and 1.5-inch handlebars. That range makes it a focused cruiser phone mount, especially for riders with thicker factory bars rather than standard 7/8-inch controls.
The spring cradle uses octagon-shaped grips, and Tackform says steel pin sleeves stop metal-on-metal cradle buzz. Its listing also says the vibration-dampening cradle reduces high-frequency vibration, which is the feature I would prioritize when a camera-equipped phone rides near a large V-twin.
The drawback is plain: the product is listed as not water resistant. I would reserve it for a bike that is usually parked under cover or pair it with a separate weather plan for the phone rather than assuming the holder protects it from rain.
The bar fit is right for 1.25- to 1.5-inch cruiser handlebars.
The supplied bushings cover three larger diameters, so measuring the bare bar at the intended clamp location matters. A rider with a Harley-Davidson-style bar in that range has a much clearer path here than a rider with narrow standard bars.
Its 3.5-inch arm can create useful clearance around a gauge cluster. It can also place the phone farther into the wind, so tighten the ball joint carefully before a highway ride.
The phone fit stays flexible because a special case is not required.
Tackform states that the cradle works with nearly all smartphone models, cases, and sizes. That is helpful for households that switch between iPhone, Samsung, or other handsets without replacing a proprietary phone case.
The heavy-duty spring tension and one-handed cradle shape are designed for quick loading, but a bulky case should still be checked for full contact with every grip. Verify that the phone’s buttons and cameras remain clear once it is seated.
2. Lamicall All-Metal Mount is the adjustable locked-clamp pick for broad phone sizes.
Lamicall Motorcycle Phone Mount Holder – [All Metal] [Anti Shake] [Extendable Arm] Bike Phone Holder Handlebar Clamp, Bicycle Cell Phone Mount, Gifts for iPhone 17 16 Pro Max, Galaxy, 4.7-7.2″ Phones
Zinc alloy body
Patented dampener
Fits 4.7 to 7.2 inch phones
Pros
- All-metal construction
- Vibration dampener
- Security lock
- Camera-friendly frame
Cons
- Bar clamp has a narrow range
- Needs safety wrench
The Lamicall uses a zinc-alloy body, an extendable arm with two 1-inch ball heads, and a safety knob. The published fit range covers phones from 4.7 to 7.2 inches, placing it among the more accommodating choices for riders who do not want a case-specific system.
Its patented dampener, lock hardware, and stated anti-theft design are the reasons it stands out. The frame is also described as camera friendly, meaning the mount is designed not to cover the phone camera when you need to record or take a photo at a stop.
Published review feedback is strong at 4.8 from 124 reviews, but the handlebar clip only fits 0.78 to 1.38 inches. Measure near the control clamp, not at the thickest painted section of the bar, before treating this as a direct fit.
The viewing adjustment is unusually broad with 720 degrees of rotation.
The paired ball heads and rotating design let you move the phone around a windshield edge, mirror, or gauge cluster more freely than a fixed cradle. That flexibility is useful for commuting when portrait navigation and landscape media controls need different angles.
Set the angle while parked and recheck the safety knob after the first ride. Any ball-and-socket mount needs a firm final lock when it will see sustained wind pressure.
The security hardware suits riders who leave a bike parked in public.
Lamicall includes special safety screws and a wrench as part of its anti-theft approach. That does not turn a phone holder into a replacement for taking your phone with you, but it adds friction to removing the mount itself.
The all-metal build is a sensible match for regular road riding. Its listed two-year warranty is another practical point for a rider who wants support beyond the first installation.
3. BRCOVAN Eight-Claw Mount is the universal quick-load choice for bumpy roads.
BRCOVAN Motorcycle Phone Mount Holder with Vibration Dampener
Eight-claw wrap
Vibration dampener
Fits 5.4 to 6.9 inch phones
Pros
- Secure eight-claw grip
- One-second operation
- Vibration dampener
- 720 degree rotation
Cons
- Fits only smaller bars
- Phone size ceiling is 6.9 inches
BRCOVAN wraps the phone with eight claws, industrial springs, soft silicone contact points, and a metal U-shaped handlebar base. That fully enclosed grip is the core appeal for a rider who wants a phone mount for motorcycle commuting, gravel roads, or occasional rough pavement without a dedicated case.
The holder has a stated 0.5- to 1.26-inch handlebar range and accepts phones from 5.4 to 6.9 inches, with a maximum stated size of 88 by 175 by 16 mm. Check all three dimensions when using a thick protective case, not just the phone’s advertised screen size.
The listing describes a vibration dampener to protect the phone and camera, plus one-second one-handed insertion and removal. Its 4.7 rating from more than 2,000 reviews gives it a larger review base than most universal holders in this selection.
The enclosed grip is made for riders who prioritize retention on broken surfaces.
Eight points of contact spread the holding work around the phone instead of relying on two narrow arms. The stated industrial springs and silicone pads are a reassuring combination for an adventure motorcycle phone mount where sharp hits are more likely.
It is still wise to stop and inspect the grip after a hard section of road. No universal cradle should be loaded with a phone that is only partly seated behind its retention claws.
The size limits matter most for extra-large and foldable phones.
A standard handset with a slim or medium case is the intended use, based on the listed maximum dimensions. A larger Pro Max-style phone may fit only if its overall height, width, and depth all remain under the stated limits.
The open universal approach is useful because no special case is required. Riders with a chunky folding device should measure with the case installed and consider a mount that publishes a wider thickness allowance.
4. Marsrider 3rd Gen Holder is the vibration-focused open-frame option.
Marsrider 3rd Gen Shockproof Bike Phone Holder, Anti Vibration Motorcycle Phone Mount with Secure Lock, Universal Handlebar Mount for E-Bike, Electric Scooter, Bicycle, ATV, Fits 4.7-7 Inch Phones
Dual pneumatic damping
Open camera frame
Fits 4.7 to 7 inch phones
Pros
- Claims up to 98 percent vibration reduction
- Open camera access
- One-hand knob lock
- Long warranty
Cons
- No foldable devices
- Not for irregular bars
Marsrider’s 3rd-generation holder centers on a dual pneumatic shock-absorbing system that the manufacturer says reduces up to 98 percent of vibration. That is a specific claim rather than a lab result supplied for this comparison, but it identifies the mount as one worth considering when camera protection leads the decision.
The semi-open face is designed to leave the camera, side buttons, Face ID, and fingerprint access uncovered. A rotating knob opens the clamp, then closes it around the phone for one-handed operation, while silicone pads and an ABS faceplate provide the contact surface.
The compatibility statement is less forgiving than the universal wording suggests: it fits 4.7- to 7-inch phones but excludes foldables and very thick heavy-duty cases. It also is not intended for oversized, flat, or irregular aftermarket handlebars.
The camera access remains clear for riders who record stops and routes.
An open-frame cradle avoids the problem of a case window covering a lens or control. That can matter to riders who use their phone for a quick roadside photo, but it does not mean the phone itself is waterproof.
The advertised 360-degree rotation allows portrait and landscape orientation. Confirm that the chosen angle does not cover a bike’s warning lights or force your eyes too far from the road.
The warranty support is a standout for a clamp-style holder.
Marsrider lists a three-year warranty and lifetime free replacement support. That is a meaningful published support term for a component exposed to weather, vibration, and frequent clamp cycles.
Its stated 0.45-pound maximum capacity also suggests staying within normal phone weights. Avoid adding a heavy battery pack or accessories that turn the holder into a load it was not designed to carry.
5. Quad Lock Handlebar Kit is the most secure case-specific system for iPhone 17 Pro Max.
Quad Lock Motorcycle Handlebar Mount Kit with Vibration Dampener and MAG Phone Case for iPhone 17 Pro Max
MAG case included
Over 90 percent vibration reduction
Four bar sizes
Pros
- Dedicated MAG case
- Strong locking system
- Vibration dampener
- Quick attach and detach
Cons
- Only for iPhone 17 Pro Max
- Requires the included case system
This Quad Lock kit is a complete fit for an iPhone 17 Pro Max: it includes a MAG phone case, handlebar mount, and vibration dampener. The case-and-mount connection is why this is my top recommendation for a rider who has that phone and wants a purpose-built attachment rather than an adjustable clamp.
Quad Lock states that the dampener reduces more than 90 percent of high-frequency motorcycle vibration. That makes the kit especially relevant to the recurring forum concern about camera stabilization hardware, although no mount can remove every vibration source or substitute for sensible route and bike maintenance choices.
The handlebar hardware supports 7/8-inch, 1-inch, 1 1/8-inch, and 1 1/4-inch bars through its included configurations. Quick attachment and removal make it easy to take the phone off when stopping, while the MAG case adds magnetic convenience to the system.
The dedicated case is the trade-off for a highly integrated lock.
This exact kit is only compatible with iPhone 17 Pro Max because the attachment point lives in the supplied MAG case. That limitation is worth stating clearly: a rider who changes phone models will need a matching case instead of simply widening a clamp.
For the intended phone, the dedicated interface removes uncertainty about claw placement and case thickness. It is a clean choice for daily GPS navigation, but confirm that the case style suits your wireless-charging and pocket-use habits.
The dampener is the key component for camera-conscious motorcycle use.
Riders often focus on whether a mount can hold at speed, yet vibration management is equally important when the phone has optical image stabilization. Quad Lock’s stated reduction figure and the separate dampener make its intent unusually clear.
Install the dampener as part of the system rather than treating it as optional hardware. Check the mount at normal service intervals and remove the phone on severe off-road terrain when the route makes its safety questionable.
6. MOGGAM Dual Clamp is the flexible handlebar-or-mirror solution for scooters and motorcycles.
MOGGAM Motorcycle Phone Mount Anti Vibration CNC Aluminum Dual Clamp Handlebar 0.87-1.26in or Mirror Bar 0.47-0.55in Quick Release Open Camera Design 360 Rotation Fits Scooter Bike E-Scooter
Handlebar or mirror fit
Dual vibration control
CNC aluminum
Pros
- Two mounting options
- Open camera frame
- Quick release
- CNC aluminum body
Cons
- Does not fit some mirrorless stems
- Maximum thickness is 0.6 inch
MOGGAM solves a common cockpit problem by offering a dual mount system: a 22- to 32-mm handlebar clamp or a 12- to 14-mm mirror-threaded-bar fit. That gives a scooter or motorcycle rider another placement option when the center bar is crowded by a windscreen brace, controls, or other attachments.
Its CNC aluminum body combines a silicone pad with TPU damping in what the listing calls a true dual anti-vibration system. The quick-release frame is open around the camera and buttons, and it supports phones from 5.4 to 7.2 inches with a maximum 0.6-inch thickness.
The main fit warning is specific: it is not compatible with integrated mirrorless stems on models such as Vespa, TMAX, Honda Forza, and Yamaha XMAX. Do not assume a mirror-mounted product works simply because your vehicle has mirrors; inspect the actual stem hardware.
The mirror-bar option clears a crowded handlebar area.
A mirror position can place navigation higher and closer to the rider’s natural sightline. It can also reduce room near the clutch and brake controls, so turn the bars lock-to-lock before calling the setup finished.
This choice is particularly appealing for scooters and bikes where the handlebar diameter sits outside a standard clamp range. The published dual fit offers a practical alternative without changing to a proprietary phone case.
The open frame favors access over all-weather enclosure.
The mount is designed not to block the camera or side buttons, which is convenient for active phone use while stopped. Because it is not a sealed phone case, the phone’s own water resistance remains the only weather protection at the front.
The quick-release action is useful when the bike is parked. Check that a case remains under the 15-mm thickness limit before relying on the clamp’s listed phone-size range.
7. BRCOVAN Charging Mount is the all-weather power option for long navigation days.
BRCOVAN Motorcycle Phone Mount with Qi Wireless & USB-C Charger
Qi 15W and USB-C 30W
IP66 rating
Vibration dampener
Pros
- Wireless and wired charging
- IP66 weather rating
- Anti-theft screw
- Vibration dampener
Cons
- Needs 12V to 24V input
- Adds wiring complexity
The charging BRCOVAN holder is the specialist option for a rider using navigation for hours at a time. It combines Qi wireless charging rated at 15W with a PD/USB-C port rated at 30W, plus a vibration dampener, a safety screw, and 720-degree orientation adjustment.
It has an IP66 water-resistance rating and is specified for 12V to 24V input, so installation means planning the electrical connection as well as clamping the holder. The product body uses PA66 with 30 percent glass fiber and an aluminum-alloy mounting base according to the listing.
The stated phone limits are 5.03 to 7.59 inches long, 2.48 to 3.46 inches wide, and up to 0.787 inches thick. That wide thickness ceiling is helpful for a phone in a substantial protective case, though wireless charging can be affected by case materials and alignment.
The charging setup suits touring and navigation-heavy commuting.
Using GPS with the screen at high brightness can drain a phone faster than a short ride suggests. This holder gives riders a wireless path and a wired USB-C alternative, so a compatible phone can stay powered without dangling a cable across the cockpit.
Confirm your motorcycle’s available 12V-to-24V source and route wiring away from steering movement, heat, and sharp edges. Test full left and right lock before fastening the final cable path.
The IP66 rating helps with exposure but does not make installation weatherproof by itself.
The listed IP66 classification applies to the mount assembly, which is valuable for rain and road spray. It does not change the water rating of the phone, connector, or any unprotected wiring connection on the bike.
Use the anti-theft screw after settling on the preferred angle. The charging feature adds useful capability, but it also means a slower initial setup than a simple unpowered handlebar clamp.
8. FREAKMOUNT 2.0 is the no-tool magnetic tank choice for compatible steel tanks.
FREAKMOUNT 2.0 Magnetic Motorcycle Phone Mount – Compatible with Harley Davidson – Premium Billet Aluminum Holder for Gas Tank, High-Speed Magnet Accessories – Fits Most Phones, Black
N52 magnets
Billet aluminum
No-tool tank mounting
Pros
- Installs in seconds
- Strong N52 magnets
- Billet aluminum body
- Waterproof coating
Cons
- Needs a magnetic metal surface
- No handlebar option
FREAKMOUNT 2.0 takes a different path from every handlebar holder here: N52 rare-earth magnets attach the billet-aluminum holder directly to a magnetic metal tank or other compatible magnetic surface. There is no clamp adjustment, no tool installation, and no special phone case in the listed design.
Hook-shaped walls provide the phone retention, and the stated phone capacity reaches 3.89 inches wide and 1.28 inches thick. The mount has a waterproof rating and an anti-scratch coating, though any contact point on a painted tank deserves a clean surface and a careful inspection before use.
This is an unusually relevant answer for the best motorcycle phone mount for Harley-Davidson riders with a compatible steel tank. It is not universal: aluminum, titanium, plastic-covered, or otherwise nonmagnetic tank surfaces will not provide the required mounting base.
The magnetic tank must be confirmed before this mount can be considered.
A magnetic phone mount is only as secure as the tank material beneath it. Test the intended location with a small magnet first, and do not mistake a steel fuel cap or trim piece for confirmation that the whole tank is magnetic.
The mount’s stated waterproof coating and anti-scratch surface are helpful details, but trapped grit can still mark paint. Wipe both surfaces clean whenever the holder is moved from one position to another.
The no-tool setup favors quick cruiser use over adjustable cockpit placement.
The ability to attach the mount in seconds is its main convenience. This makes it practical for a compatible cruiser where a handlebar clamp looks out of place or space is already tight.
Tank placement can require a longer glance downward than a high handlebar or stem mount. Position it where it cannot obstruct fuel-cap access or interfere with your body position during full steering movement.
9. iMESTOU Fork Stem Case is the weatherproof sportbike-focused stem-mount option.
iMESTOU Waterproof Motorcycle Fork Stem Phone Mount Case 1″ Ball Bike Phone Holder Anti-Theft with B Size Double Socket Arms Aluminum Ball Base for 5.5″-6.8″ Cellphones (L)
Fork stem base
IP66 phone case
Anti-theft key lock
Pros
- Fork-stem placement
- IP66 case
- Touchscreen window
- Compatible with RAM B size
Cons
- Fits only specified stem holes
- Size L case may not fit all phones
The iMESTOU is the distinct fork-stem alternative in this list, using an aluminum 1-inch ball base for stem holes from 12 mm to 18.5 mm to 25.4 mm. It is designed for motorcycles with a usable center stem opening, which can make it a sensible motorcycle GPS mount on a sportbike with little exposed handlebar space.
Its IP66 case uses a sensitive PET touch screen and a transparent window intended not to block the phone camera. An anti-theft knob lock with a unique key secures the case, while RAM B-size compatibility opens the door to compatible 1-inch ball accessories.
The limitation is the enclosed Size L case and a stated 150-gram maximum capacity. Confirm the exact phone dimensions, weight, and fork-stem opening before ordering; this is a purpose-specific system, not a general phone holder.
The fork-stem position works when clip-ons leave no practical handlebar clamp space.
On many sportbikes, a fork stem offers the cleanest central mounting point between the bars. The ball base allows angle adjustment, but clearance must be checked against the ignition, steering damper, screen, and tank at full lock.
Measure the internal stem diameter rather than the outside of the steering head. The listed 12-, 18.5-, and 25.4-mm fit points make that measurement a nonnegotiable part of the decision.
The sealed case favors wet rides but changes direct phone access.
An IP66 enclosure provides a layer of weather protection that open cradles do not offer. The PET window is described as touch sensitive, but any covered setup can feel different from touching the phone directly, especially with gloves.
The lock adds security when parked, yet riders should still remove a phone from sight whenever possible. Check that the camera window lines up with your handset before committing to the enclosed case format.
The right motorcycle phone mount depends first on vibration control, mounting space, and phone fit.
A quality mount does more than keep a navigation screen visible. It must stay secure under wind and bumps, avoid pinching buttons or cameras, and fit the actual bar, tank, mirror, or stem on the motorcycle.
Vibration control matters most when your phone has a stabilized camera.
Engine and road vibration can reach the phone through a rigid mount. Forum discussion repeatedly flags camera trouble after riding without a dampener, and several products here specifically state that they isolate or reduce high-frequency vibration.
Choose a mount with a stated dampener for regular riding, especially on a motorcycle with noticeable engine pulse or for rough-road use. The Quad Lock kit, Tackform, both relevant BRCOVAN models, Lamicall, MOGGAM, and Marsrider all list vibration-control features, although their designs and claims differ.
The mounting point must match the bike before the phone holder matters.
Handlebar mounts need a diameter match and clear space around cables, controls, and instruments. MOGGAM adds a mirror-bar alternative, FREAKMOUNT needs a magnetic metal tank, and iMESTOU needs a compatible fork-stem opening.
Turn the steering fully left and right with the phone installed before riding. The mount, phone, cable, and arm should not touch the tank, windscreen, brake lines, throttle housing, or gauge cluster.
The phone-and-case measurement must include thickness as well as screen size.
Screen size is a rough guide, not a fit confirmation. A rugged case, pop grip, camera bump, or folding hinge can change the width and thickness enough to exceed a cradle’s listed limits.
Case-specific systems such as this Quad Lock kit use the matching phone case as part of the lock. Universal clamp systems avoid that commitment, but they demand a careful check that every retention point contacts the phone securely.
The weather plan should cover the phone, mount, and charging connection.
IP66-rated products such as the BRCOVAN Charging Mount and iMESTOU case have a stated level of water protection, while open mounts expose the phone itself. A holder marked not water resistant, such as the Tackform, should not be treated as rain protection.
For charging mounts, secure the wiring so it cannot stretch when the steering turns. Stop using any mount if the clamp shifts, the damping element tears, the retention surfaces wear smooth, or the phone begins to move under normal road vibration.
The installation sequence is simple when you check clearance at every step.
Measure the handlebar, mirror bar, tank surface, or fork stem where the mount will sit.
Install the supplied clamp, adapter, or base according to the product directions without trapping cables.
Fit the phone with its normal case and lock every grip, latch, or case interface completely.
Set the viewing angle while parked, then turn the bars from lock to lock and check controls and visibility.
Ride a short familiar route, stop, and retighten only if the product instructions call for it.
These common motorcycle phone mount questions have short, practical answers.
What is the best motorcycle phone mount?
The Quad Lock Handlebar Kit is the best choice in this group for an iPhone 17 Pro Max rider who wants a dedicated case lock and stated vibration reduction. Choose the BRCOVAN Eight-Claw Mount for a universal clamp, FREAKMOUNT 2.0 for a compatible magnetic steel tank, or iMESTOU when a fork stem is the only practical mounting point.
Can vibrations from my motorcycle damage my iPhone camera?
Motorcycle vibration can be a concern for phones with optical image stabilization, and forum riders report camera problems after riding without a dampener. A vibration-dampening mount can reduce high-frequency vibration; Quad Lock states its included dampener reduces more than 90 percent, while other mounts here use dampening cradles, pneumatic systems, silicone, or TPU isolation.
How do I install a motorcycle phone mount?
First measure the intended handlebar, mirror bar, tank surface, or fork stem against the product fit range. Install the base without pinching cables, lock in the phone with its normal case, turn the steering fully both ways to check clearance, and inspect the mount after a short test ride.
Is it legal to use my cell phone while riding my motorcycle?
Phone-use rules vary by state and local jurisdiction, so check the law where you ride. A mount can help with navigation, but it does not make handheld use or distracted riding legal; set your route and audio before moving and keep attention on traffic.
Can I attach a motorcycle phone mount if I already have other attachments on my handlebars?
Yes, if there is a clear section of bar within the mount’s stated diameter range and the phone will not interfere with cables, controls, gauges, or full steering travel. If bar space is limited, consider MOGGAM’s mirror-bar option, FREAKMOUNT on a compatible magnetic tank, or an iMESTOU fork-stem mount.
The best choice is Quad Lock for its dedicated lock, but fit should make the final call.
For the specific iPhone 17 Pro Max covered by its kit, Quad Lock combines a purpose-made MAG case with a stated high-frequency vibration reduction feature and several handlebar-size configurations. BRCOVAN’s eight-claw model is the universal alternative I would start with for a conventional handlebar, while FREAKMOUNT and iMESTOU solve tank and fork-stem situations that a normal clamp cannot.
Before selecting from these best motorcycle phone mounts in 2026, measure the bike and phone with the case installed, then choose the mount style that leaves every control and the full steering range clear. A secure fit and sensible vibration protection are more useful than extra features you cannot install correctly.